And that’s too often a fruitful soil for a lot of issues. One of the frequent errors that occur due to unfitting drivers is known by the code 0x800705b3. This error occurs when Windows Update is unable to install the fitting software for its hardware counterparts. So, if you’ve got in contact with this error and your updates are stalled, you should check the list below where we enlisted the best-suited workarounds.

How to resolve Windows 10 update error 0x800705b3

How to fix Update error 0x800705b3 in Windows 10

Solution 1 – Update your drivers manually

As we stated so many times before, in order to make everything function as intended, you’ll need to get the drivers yourself. Drivers that are updated over the air are not always best suited for the job. Additionally, some of the devices may be outdated so you’ll need to find a proper legacy driver to get them going. If you’re unsure how to get valid drivers, follow the instructions: It’s the highest priority to download the drivers from trusted sources in order to escape malware or critical damage to your system. Update drivers automatically In order to prevent PC damage by installing the wrong driver versions, we strongly suggest doing it automatically by using a dedicated tool. This tool is approved and tested by our team and will help you update all outdated drivers safely. After several tests, our team concluded that this is the best-automatized solution. Below you can find a quick guide on how to do it. In addition, you can set up driver backups and go back where you started with your drivers, in case anything wrong occurs in the process. Hence, managing your drivers with this practical tool will provide an automatic scan for missing or outdated drivers, optimizing the hardware with their latest drivers’ versions. ⇒ Get DriverFix

Solution 2 – Run Update troubleshooter

One of the additions that rolled with the Creators Update is a unified troubleshooter that should be of more use than the previous built-in solutions. So, you can navigate to the new unified menu and troubleshoot the issues at hand. In this exact event, you can troubleshoot Updates, plus the Hardware and Devices, just in case. Follow the instructions to do so: SPONSORED However, if the problem is still persistent, make sure to check the steps below in order to resolve it.

Solution 3 – Prevent the driver from auto-updating

Even though it’s quite hard to disable some of the update features and prevent a certain device from updating, there is a way. More than one, to be exact. And you can find those with thorough explanations in this article. Additionally, there are reports that some older devices can interfere with the update procedure so make sure to unplug the device and uninstall the driver. Later on, you can find some alternative legacy drivers that should get you going. That’s one of the few fallacies of Microsoft’s latest addition: some older devices are simply not supported. And a lot of folks, due to professional needs of outdated printer or scanner, decided to roll back to Windows 7 just because of that.

Solution 4 – Run the SFC scan

Another troubleshooting tool worth trying is the SFC scan. This is a command-line tool that basically scans your computer for potential issues and resolves them on the way. Here’s exactly what you need to do:

Solution 5 – Run DISM

The next tool we’re going to try is DISM. Here’s how to run DISM in Windows 10: Here’s how to run DISM in Windows 10:

Solution 6 – Reset Windows Update components

If none of the troubleshooting tools managed to resolve the problem, let’s try with resetting crucial update components. Here’s what you need to do:

net stop wuauserv net stop cryptSvc net stop msiserver ren C:WindowsSoftwareDistribution SoftwareDistribution.old ren C:WindowsSystem32catroot2 Catroot2.old net start wuauserv net start cryptSvc net start msiserver

Solution 7 – Make sure the Windows Update service is running

The most crucial service for receiving updates in Windows 10 is the Windows Update service. If this service is not running properly, well, you won’t be able to get any updates. So, make sure it runs by doing the following:

Solution 8 – Make sure the BITS service is running

Background Intelligent Transfer Service (BITS) is an essential service for Updates. On some occasions, due to various reasons it can crash and stop working. What you need to do is restart the service and see if there is an improvement in the Update protocol. Here’s how:

Solution 9 – Change DNS settings

If none of the previous workarounds resolve the problem, we’ll try and change the DNS settings. Here’s how to do that:

Solution 10 – Perform a clean reinstallation

In the end, if everything falls short and you’re still looking at the error creeping on you from the screen, the clean reinstallation is a logical action. Luckily, is never been so easy to perform a clean reinstall like on Windows 10. A detailed explanation can be found in this article. In addition, make sure to backup your data on the non-system partition and take good care of your license key. With that, we think that you’ll have enough material to resolve this update issue. In case you need additional help or have an alternative solution, make sure to tell us in the comments section.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ